by ETI Staff | May 14, 2014 | Control, Controller, Featured, Sensors, snow melting management, Weather
Roof and gutter deicing technology helps protect homes and facilities from the ravages of winter weather. Safety is the priority when bringing electrical solutions that result in converting ice to water. Installation and operating instructions for controllers and...
by ETI Staff | Aug 2, 2011 | Frequently Asked Questions
The GFEP indicator will come on when a ground fault occurs in one of the heater circuits. The insulating resistance of the heater cable is breaking down or the cable has been damaged allowing current to pass to ground thru an incorrect pathway. Left un-repaired the...
by ETI Staff | Aug 2, 2011 | Frequently Asked Questions
There are two basic way to test a system to ensure that the control(s) will work when snow and/or ice are detected. The first way is to simulate the conditions required for operation. Lower the temperature of the sensor if it is not cold enough out and then get the...