by ETI Staff | Oct 21, 2013 | Control, Controller, Featured, Press Release, Pro Series, Sensors, snow melting management, Weather
PD Pro with Broader Input Voltage Range Because you need a modest snow melting system – perhaps pilot duty sized – and you’re looking for an ideal controller for it, look into Environmental Technology Inc.’s Snow Switch® Model PD Pro, the ice and snow detection and...
by ETI Staff | Aug 4, 2011 | Frequently Asked Questions
When using a control or controller that does not include integral ground fault, using a ground fault breaker is required to provide protection for the heater tapes used with this product. Failure to do so will put the installation at risk for fire if the heaters...
by ETI Staff | Aug 2, 2011 | Frequently Asked Questions
There are two basic way to test a system to ensure that the control(s) will work when snow and/or ice are detected. The first way is to simulate the conditions required for operation. Lower the temperature of the sensor if it is not cold enough out and then get the...