Software information
MIB Files
The most current versions of MIB files can be downloaded via the following links.
ADH NETCOM MIB
ASM-1 SMART MANIFOLD MIB
REQUIRED: Enable TFTP Client (Windows 7/10/11)
Under Windows XP, the Environmental Technology Inc. script to update the firmware works fine. However, the script may hang and give an error under Windows 7/10/11. The error may be: “Wshshell.exec: The system cannot find the file specified.” This problem occurs because Windows 7/10/11 does not have TFTP enabled.
To correct:
• Click on [START]
• Click on [Control Panel]
• Click on [Programs]
• Under the heading “Programs and Features,” click “Turn Windows features on or off”
• Under “Windows Features” screen, scroll down and check-select “TFTP Client”; click [OK] to save and exit
WARNING!
Units received after 10/07/2016 can not be downgraded to previous software versions.
Units that can not use previous software versions have serial numbers greater than:
3596 for an ADH NETCOM
0852 for an ADH NETCOM NEMA
0156 for an ASM-1 Smart Manifold
MOST CURRENT RELEASES
ADH NETCOM
2.19 (2021-11-30) This update is to reduce the odor that occurs during regeneration on new units.
ASM-1 Smart Manifold
2.2 (2017-19-17) Version 2.2 fixes software Increased time-out for web page/unit communication from 1 to 10 seconds, to accommodate users with very slow links.
PREVIOUS UPDATES
Previous updates are maintained for informational or troubleshooting purposes only. The most current release will always be a complete software update and not require previous updates to be installed first.
ADH NETCOM
2.18 (2021-01-20) Updated to accommodate new desiccant canisters, will now work with both old and new versions of the canisters.
2.17 (2017-12-18) Version 2.17 fixes bug in the firmware where the compressor time was incorrectly displayed on the front panel, Increased time-out for web page/unit communication from 1 to 10 seconds, to accommodate users with very slow links.
2.16 (2017-04-11) Version 2.16 fixes
2.15 (2017-02-03) Version 2.15 adds SNMP trap support for monitor and control systems. This version also adds support for a new pressure sensor that replaced an obsolete sensor.
ASM-1 Smart Manifold
2.2 (2017-08-02) Version 2.2 fixes software bugs that may cause a Smart Manifold to not act as expected. It is recommended that all units in the field with earlier software versions be updated.
2.1.6 (2012-06-07) Version 2.1.6 fixes software bugs that may cause a Smart Manifold to not act as expected.
2.12 (2011-09-30) Version 2.12 was the first released version.