Can the APS activate on temperature only?

The APS-C series systems are designed to turn on and off, as the weather requires heat to deal with snow or icing conditions. Although a thermostatic dry contact switch can be used to override the system on for temperature only, is not recommended since it will reduce...

External contactors used with the APS-4C?

No, using external contactors will cause the GFEP circuit on the APS-4C to detect the inductive load of the contactors coil as ground fault and alarm the system every time the contactor is turned on. In order to increase the size of the application, a SC-40C satellite...

Flashing supply light.

A flashing supply light indicates a missing or broken High-Temperature Limit sensor. This sensor is required to make the APS-C series controller to work. It is required on all of the APS-C series controllers. The sensor is not polarized and must be connected to pins...