GPT 130 Single–Point General Purpose Heat–Trace Control

The TRACON GPT 130 Heat–Trace Control is a single–point microprocessor–based heat–trace control thermostat. It is ideal for applications which require Ground–Fault Equipment Protection (GFEP). Ideal uses include freeze protection, hot water temperature maintenance, grease line trace, tank heating, and other temperature monitoring and control applications. The GPT 130 and its heater load can operate with an available line voltage source of 100 – 277 V ac. The controller and heater load share the same supply connection. The internal load contactor is rated to switch up to 30 A resistive. The Integral GFEP provides safety in compliance with national and local electrical codes. The unit’s housing is a NEMA 4X IP66 weather–resistant enclosure for enhanced durability.

Features and Benefits

• Adjustable temperature setpoint allows precise control of a wide range of processes
• Can use an NEC Class 2 temperature sensor with up to 2,000 ft. cable for enhanced installation options
• Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
• RTD input allows higher accuracy and extreme–temperature applications
• The unit can accommodate RTD sensors with 2–, 3–, or 4–wire configuration
• Temperature display for accurate adjusting and monitoring
• Load current display for accurate adjusting and monitoring
• Ground fault current display for accurate monitoring, protection, and alarm
• Adjustable alarm thresholds for excess ground fault current, load current, and temperature
• Alarms indicated with panel display and relay contact for remote signaling
• A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor failure
• Fire Protection Mode maintains heater operation for use in critical fire protection systems
• Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation

FPT 130 Single–Point Freeze Protection Heat–Trace Control

The TRACON FPT 130 Heat–Trace Control is a single–point microprocessor–based heat–trace control thermostat. It is ideal for applications which require Ground–Fault Equipment Protection (GFEP). Ideal uses include freeze protection, and other temperature monitoring and control applications. The FPT 130 and its heater load can be powered with an available line voltage source of 100 – 277 V ac. The controller and heater load share the same supply connection. The internal load contactor is rated to switch up to 30 A resistive. The Integral GFEP provides safety in compliance with national and local electrical codes. The unit’s housing is a NEMA 4X IP66 weather–resistant enclosure for enhanced durability

Features and Benefits

• Adjustable temperature set point of 30 °F, 38 °F, 45 °F, or 50 °F (−1.1 °C, 3.3 °C, 7.2 °C, or 10 °C)
for various freeze protection applications
• Can use an NEC Class 2 temperature sensor with up to 2,000 ft. cable for enhanced installation options
• Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
• Ground–Fault Equipment Protection with manual and automatic test function
• Alarms for excess ground fault current, low load current, and temperature
• Alarms indicated with panel LED lights and relay contact for remote signaling
• A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor failure
• Fire Protection Mode maintains heater operation for use in critical fire protection systems
• Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation

GPT 230 Dual–Point General Purpose Heat–Trace Control

The TRACON GPT 230 Dual Channel Heat–Trace Control is a dual–point microprocessor–based heat–trace control thermostat. It is ideal for applications which require two independent heater–control Channels with Ground–Fault Equipment Protection (GFEP). Ideal uses include freeze protection, hot water temperature maintenance, grease line trace, tank heating, and other temperature monitoring and control applications. The GPT 230 and its heater load can be powered with an available line voltage source of 100 – 277 V ac. The controller and heater load are powered from the same supply connection. The two internal load contactors are rated to switch up to 30 A resistive. The adjustable GFEP function provides additional safety and compliance with national and local electrical codes. The unit’s housing is a NEMA 4X IP66 weather–resistant enclosure for enhanced durability.

Features and Benefits

• Adjustable temperature setpoint allows precise control of a wide range of processes
• Can use an NEC Class 2 temperature sensor with up to 2,000 ft. cable for enhanced installation options
• Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
• RTD input allows higher accuracy and extreme–temperature applications
• The unit can accommodate RTD sensors with 2–, 3–, or 4–wire configuration
• Temperature display for accurate adjusting and monitoring
• Load current display for accurate adjusting and monitoring
• Ground fault current display for accurate monitoring, protection, and alarm
• Adjustable alarm thresholds for excess ground fault current, load current, and temperature
• Alarms indicated with panel display and relay contact for remote signaling
• A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor failure
• Fire Protection Mode maintains heater operation for use in critical fire protection systems
• Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation