PIPE TRACE / FREEZE PROTECTION CONTROLS

Tracon FPT 130 Heat–Trace Control
A Point Microprocessor–Based Heat–Trace Control Thermostat with GFEP. Operates heaters at temperature setpoints of 30 °F, 38 °F, 45 °F,
Read more.
Tracon GPT 230 Heat–Trace Control
A Dual Channel Point Microprocessor–Based Heat–Trace Control Thermostat with GFEP. Operates heaters at temperature setpoints from −99.9 °F to 999
Read more.
Tracon GPT 130 Heat–Trace Control
A Point Microprocessor–Based Heat–Trace Control Thermostat with GFEP. Operates heaters at temperature setpoints from −99.9 °F to 999 °F (−73.3
Read more.
SST-2 Freeze Protection Thermostat
A freeze protection thermostat with ground fault equipment protection that operates heaters at temperatures below 40°F (4.4°C) and turns them
Read more.
SST-3 Electronic Thermostat Heat-Trace Control
A freeze protection thermostat with ground fault equipment protection that operates heaters at an adjustable set point from 34°F to
Read more.
GPT-3
A freeze protection thermostat with ground fault equipment protection that operates heaters at an adjustable set point from 41° to
Read more.

AUTOMATIC AIR DEHYDRATORS

ADH NETCOM Rack Mount Configuration
ADH NETCOM
An automatic waveguide dehydrator, with network compatible configurable operational monitoring and alarms that supplies low-pressure dry air to keep waveguide
Read more.
ADH NETCOM NEMA
A NEMA rated enclosed automatic waveguide dehydrator, with network compatible configurable operational monitoring and alarms that supplies low-pressure dry air
Read more.
ADH Sirocco
An automatic waveguide dehydrator, with configurable operational monitoring and alarms that supplies low-pressure dry air to keep waveguide and coaxial
Read more.

MANUAL REGENERATION AIR DEHYDRATORS

EDH-4
A low cost, non-regenerating air dehydrator for pressurizing small volume waveguides and coax. It is especially suited for C, X,
Read more.
EDH-5
A low cost, regenerating air dehydrator for pressurizing small volume waveguides and coax. It’s well suited for Ku and Ka
Read more.
RCD Passive Dehydrators
A line of dehydrators meant for small volume waveguide and coax systems that can also be used to supply short-term
Read more.

AIR DISTRIBUTION MANIFOLDS

ASM-1 Automated Air Distribution Manifold
A network ready smart manifold that automatically distributes low pressure dry air from one or more sources to one or
Read more.
RCM-1 and RCM-2
High quality, low cost manifolds can allow a single dehydrator to interface up to eight antennas, or a single manifold
Read more.

COMPRESSOR UPGRADE KITS

ADH NETCOM Compressor Assembly
This direct replacement compressor will help extend the life of your ADH Netcom unit.
Read more.
ADH-3COM Compressor Upgrade Kit
An upgrade compressor that has a drastically extended service life and provides superior performance at higher pressures.
Read more.
ADH-2A COM Compressor Upgrade Kit
An upgrade compressor that has a drastically extended service life and provides superior performance at higher pressures.
Read more.

SNOW & GUTTER ICE MELTING CONTROLS

EUR-5A
An electrical panel located energy efficient snow and ice melt control unit that uses compatible environmental sensors to automatically switch
Read more.
APS-3C
An energy efficient snow and ice melt control unit that uses compatible environmental sensors to automatically switch snow and ice
Read more.
APS-4C
An energy efficient snow and ice melt control unit with ground fault equipment protection that uses compatible environmental sensors to
Read more.
SC-40C
A satellite control unit for the APS-4C with ground fault equipment protection allows for a modular snow melting system design.
Read more.
Snow Melting Systems Control: GF Pro
An energy efficient snow and ice melt control unit with ground fault equipment protection for smaller applications that uses compatible
Read more.
Snow and Ice Melting Systems Control PD Pro
An energy efficient snow and ice melt control unit for smaller applications that uses compatible environmental sensors to automatically switch
Read more.

SENSORS FOR CONTROL PANELS

SEM-1 Sensor Expansion Module
The Snow Switch brand SEM–1 sensor expansion module provides enhanced monitoring of each sensor used in a snow and ice
Read more.
CIT-1 Aerial Snow Sensor
An aerial snow and ice sensor that detects falling or blowing snow at or below 38°F (3.3°C).
Read more.
GIT-1 Gutter Ice Sensor
A gutter sensor that detects snow and ice accumulation in the gutter at or below 38°F (3.3°C).
Read more.
SIT-6E
A pavement sensor that detects snow and ice conditions on pavement surfaces at or below 38°F (3.3°C).
Read more.
CIT-XTV
An aerial snow and ice sensor for antennas detects falling or blowing snow at or below 38°F (3.3°C).
Read more.

AUTOMATIC CONTROLS & SENSORS

ES-1
A Rain/Snow Interface determines environmental conditions for commercial and residential building automation systems employing computer or PLC control.
Read more.
HSC-24 Controller
A self-contained pavement sensor and controller, detecting snow and ice at or below 38°F (3.3°C) and preforming switching function, eliminating
Read more.
Snow Melt System Controls: LCD-8
A self-contained aerial sensor and controller, detecting snow and ice at or below 38°F (3.3°C) and preforming switching function, eliminating
Read more.